China Wholesale Rf Circuit Board Suppliers - 6 Layer ENIG Impedance Control PCB 10222 – Huihe

Factors determining controlled impedance

The characteristic impedance of a PCB is usually determined by its inductance and capacitance, resistance and conductance. These factors are functions of the physical size of the circuit, the dielectric constant and dielectric thickness of the PCB substrate material. In general, the line impedance of a PCB ranges from 25 to 125Ω. The PCB structure that determines the impedance value consists of the following factors:

Width and thickness of top and bottom copper signal lines

Width of top and bottom copper wires. The inner layer process range of the assembly and circuit is 0.5oz 3/3mil to 6oz 15/12mil copper signal line, and the outer line distance varies from 1/3oz 3/3mil to 6oz 15/12mil.

Core plate or semi-cured sheet thickness on both sides of copper wire

The semi-cured sheet is used as a bonding layer to hold all core boards together in a PCB. When designing the impedance control PCB, the thickness of the semi-cured sheet on both sides of the core board should be the same.

Dielectric constant of core plate and semi-cured sheet

If the dielectric constant of the core plate and the semi-cured sheet are different, the impedance will also change. Therefore, the dielectric constant of the two should be the same.

Equipment display

Automatic Plating Line

PTH line

LDI

CCD Exposure Machine

Application

Communications

Security electronics

Railtransit